
8-Segment MsT Probes
Designed for pipes with nominal diameters of 4–6 inches. Suitable for installation where approximately 25 mm of clearance is available between adjacent pipes.
Sensor configurations, application photographs, and technical specifications.
Multi-segment magnetostrictive guided-wave probes for axial and circumferential pipe inspection, including regions beneath pipe supports. Six photographs show bracelet probes, a flat 8 × 8 array, and full- and partial-circumference installations.

Designed for pipes with nominal diameters of 4–6 inches. Suitable for installation where approximately 25 mm of clearance is available between adjacent pipes.

The 9-segment MsT bracelet probe wraps around the pipe for axial scanning; the 8 × 8 MsT array is a flat probe mounted along the pipe surface.

Designed for inspection in restricted spaces, requiring approximately 11 mm clearance between adjacent pipes.

Originally designed for a 10-inch pipe, shown with partial circumferential coverage on a 55-inch OD pipe to perform axial scanning of pipe supports.

Shown with full circumferential coverage. Partial-coverage installations use a clamping strap to secure the probe over part of the circumference; the 11-segment and adjustable 4-segment examples illustrate partial coverage.

Designed for pipes starting at 102 mm outside diameter, with partial-coverage configurations extending to approximately 170 mm.
Installation and acoustic coupling: Bracelet-type segmented MsT probes wrap around the pipe. Inflatable bladders can conform individual segments to the pipe surface; an appropriate couplant improves acoustic coupling where required by the design.
General probe specifications: Operating frequencies approximately 20–200 kHz. Probe weights approximately 1–5 lb (0.45–2.27 kg), depending on size and configuration. A probe sized for a 16-inch OD pipe is approximately 5 lb. Array configurations support TFM imaging with compatible acquisition electronics.